Skip to product information
1 of 5
Your description

Thermogroup

ThermoGroup Thermorail 600x540x99mm 240V Straight Square Swivel Steel Heated Towel Rail 4 Bars

ThermoGroup Thermorail 600x540x99mm 240V Straight Square Swivel Steel Heated Towel Rail 4 Bars

SKU: TG-SV35

Regular price $582
Sale price $582
Sold out
Finish

Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The SV35 Heated Towel Rail is a 600x540 4 bar polished stainless steel swivel rail.

The SV35 towel dryer is able to be swivelled 180 degrees when installed on the wall. Each bar can also be swivelled independently on the rail. The advantage of the swivel rail is that the bars can be spread out to help drying and they can be installed in a corner with only two mounting points on the wall.

The swivel rail can be hardwired or plugin with the wiring coming from the fixing point at the bottom of the rail. The rail also features an on/off switch on the bottom of the upright.

The electric towel rail is designed to rapidly heat up and reach a temperature of around 45-55 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs.

Specification:

  • -Straight Square Swivel Heated Towel Rail
  • -Product Code: TG-SV35
  • -Finish: Polished Stainless Steel
  • -Quality Stainless Steel
  • -Output: 48Watts
  • -IP Rating: IP44
  • -Lead Length: 1.4m
  • -Voltage: 240Volt
  • -No of Bars: 4
  • -Wiring Type: Concealed (hardwired) or exposed (plugin)
  • -Wiring Position: Bottom mounting position
  • -Distance Between Mounting Points (Top to Bottom): 478mm
  • -Size (mm): W600 x H540 x D99
  • -Bars swivel independently
  • -Warranty:
     10 years

Installation Guide: Please read these instructions carefully and in full before installation.
Installation should be carried out by a qualified electrician.

Please Note: Specifications are for information purposes only. Whilst every effort has been made to ensure the product specifications are accurate, due to continuing product development and improvement the specifications are subject to change. Specifications can be used to rough in and fit timber supports in the wall however we recommend no holes are drilled without having the product on site or verifying the details with the manufacturer.


View full details